Quilling A Puppy Dog

Since I did a video on quilling a kitty cat I thought it only fair to make a video on quilling a dog. I have to be fair to both sides or all sides of the animal world. Did I just say that? That means I have to quill lions and tigers and bears.....Oh My! OK, so I already did the bear :) you can find that one HERE. Thanks for watching!

Don't forget to visit my blog for more fun too!

Quilling A Kitty Cat

Wow! It's been a long time since I have posted a video. I have been crazy busy at home. My how I wish I could lay around like a kitty cat and relax. That made me think that I should show you how to quill a kitty cat! So here you go.......enjoy!

Don't forget to visit my BLOG for more fun too!

Corner Bookmark Card Using Scor-Pal

I found the original idea from stamper, Barb Mulliken but I adapted them a bit so I could use the Scor-Pal with it.

This is a fun card that features a corner bookmark right on the card but then the recipient can use the bookmark, which I thought was cool.




Ok here are the directions for making the corner bookmark part, which is the flower blossom part on the finished above card.

Start with a piece of 3 x 3 cardstock. I used my Scor-Pal to score the 2 lines needed to make the flaps that fold down. I placed my square piece of cardstock like a triangle on the top fence of the Scor-Pal, so the tip of fits right into the groove for the 3-1/2 mark. Then I used my bone folder to score the cardstock on the 4-1/2 mark. I penciled in lines on the first 2 pictures to show you where I scored. To make the 2nd score line, I just simply rotated my square piece of cardstock clock wise to the same spot and scored again at the 4-1/2 mark.




















Now score those lines and fold back the 2 trianges.










I placed a piece of double sided tape to the OUTSIDE of the flaps (the black smudge you see in the photo is on the tape)









I took a piece of matching white cardstock that measures 2-1/16 x 2-1/16 an cut that in half on my paper trimmer so I have 2 triangles. I took one of the triangles and adhered it over the flaps so it looks cleaner.







So now flip over your cardstock and it's time to decorate. That's the hardest part, deciding what to design!

I used a scrap of the TAC More Mimi paper collection for the border with 2 blue buttons layered on top. I added some beautiful raspberry ribbon from Mimi ribbon and the white blossom with silver brad. The pink flower is from a fabric coaster I found at Michael's, I cut the flower from the coaster. So that's the bookmark part.

I took the same paper from More Mimi and adhered that to the white base cardstock. Since the paper is double sided I had to flip a part of the cardstock up. I stamped "hello" (from Doodle Bugs TAC stamp set)in Perfect Plumeria. The girl image is from the sunday stroll TAC stamp set. I've been practicing my coloring and I colored this image in with my watercolor pencils using Goo Be Gone and the blending stumps. I really like that technique! I added a little sparkle to her using the Stardust Clear Gelly Pen. I cut her out using my Kai scissors and used a pop dot to layer her on the More Mimi TAC paper.

Here is the bookmark in use:

I hope you have enjoyed this project and let me know if you have any questions!

If you have any questions on how I made this project, please let me know!



P.S. For more stamping inspiration stop by Ellie's Stamp Garden

Flower Pot Card Tutorial

At last, here is the promised tutorial on the flower pot from this post! The concept for the pot is not mine - I've seen it in many places on the internet. However, I wanted more room to stick on the flowers, and a shorter pot, so designed my own size and shapes to create it.

Click on any picture to get a closer look.


Cut a rectangle of card measuring 21cm x 10.5cm. Score at 8.5cm from one end and 4cm from the other.



Fold up on the 8.5cm score line. Measure in 1.5cm from each side along the crease. Draw a line from those points to the top corners of the flap as shown.



Cut along both of the lines to shape the sides of the pot. Leave the card folded whilst you do this.



Unfold the card, and place the embossing folder so that the edge of the pattern runs along the 8.5cm score line, and the folder covers over the front of the pot (the piece with the 4cm flap on it).



This is the finished embossing - as you can see, it extends over the 4cm score line. Scallop the edge of the 4cm flap as shown.




Turn the card over so that the outside of the pot is facing downwards, and put a narrow strip of glue along the two tapered sides. This must be very narrow, otherwise the inner card will not be able to slide in. If you are using tape, it needs to be narrower than 0.5cm to leave enough room. Fold up and stick together.



Apply glue along the underside of the 4cm flap as shown.



Fold over and press down.



Set a pair of compasses at 5cm to draw a 10cm diameter circle. Make sure that you press the point of the compass so that it clearly makes a mark in the centre of the circle.



Using a ruler draw a line through the mark in the center to divide the circle in half.




If you don't have any compasses or don't like using them, here is a template for the two half circles. Click on the image to enlarge it, and then right click on the enlarged image and save it to your computer. Then print out from this saved image, and it should print out correctly at a 10cm diameter.




Here are the two half circles cut out, plus a rectangle of card for the message insert. This measures 11cm x 6.5 cm. If you prefer, you can use a corner rounder to round off the two corners that will go inside the pot - this will help it to slide in more easily.



Insert the message rectangle into the pot all the way until the end of it is at the bottom of the pot. Make sure it is sitting straight. Then apply glue as shown.



Stick one of the semi circles over the glued portion of the message insert.



Turn the whole thing over and apply glue over the back of the insert and semi-circle.



Stick the other semi-circle on top as shown.




Here are the two completed elements of the pot ready for decorating with flowers. To make sure that the flowers fit together nicely when the pot is 'closed', make the arrangement with the insert placed into the pot - make sure that you don't glue anything over the join between pot and top though!

I have had some requests for how to make the flowers, and am working on the tutorial for that if you're interested to come back for it.

In the meantime, here's a reminder of what the two decorated parts look like -

My Blog Mainly Flowers

Handbag Tutorial

Materials

Pink Card handbag 10.5" x 6"

Insert box 7" x 6"

Hndbag strap 1" x 10.5"

White card Lid of handbag 4" x 6"

Flowers and ribbon to decorate

Lets get started

click on the images to enlarge

Get scoring follow the arrows

Making up the insert box

The inside just nice to pop in a gift

Making the top of the bag pretty

Things are starting to take shape

Nearly there!

Last step

To see more of my tutorials visit me at http://crafterskitchen.blogspot.com/

How To Quill Chocolates! Yummy!

I recently taught a quilling class and I showed everyone how to quill chocolates. You can put them on cards or place them in a cute little chocolate box. You can see the finished chocolates from my class on Anne's Blog. Hope you enjoy them, but don't eat them. After all, they are made out of paper!

How to Quill Chocolates Yummy

Spellbinders - Shapeabilitie Butterfly Dies

The last week has been hectic for me but I still managed to make a couple of cards using my Cuttlebug.

At the risk of becoming boring, I have used my Butterfly Shapeabilities to make a completely different card to last week's, because I thought you might like to see just what you can do with the smallest die.

Using a mottled beige cardstock cut to make a 5.1/2" square card, stamp a large swirl in gold ink and embossed with a clear embossing powder. 2 Fancy Corner die cuts finished the base card. Don't throw away the pieces left over - these can be used to decorate inside corners.



For the embellishment I used a thick handmade patterned paper to
cut a large butterfly and embossed this with the Paisley Cuttlebug folder.


To increase the boldness of the butterfly, use a glue stick to add a thick layer of glue to the edges. Cover with gold embossing powder and melt the power and glue with a heat gun.


This is the effect you get.



To complete the butterfly's body use : 2 eyelets and some twisted gold thread. Gold wire and beads for the antennae.
Cut 4 small gold mirror card butterflies.











Attach back to back over the gold thread to make 2 charms on which I have added numbers for this special birthday card.










Still using the Butterfly theme, cut and emboss the larger die (you can use an embossing pen for this if you don't have a tan mat), ink the edges and stamp in some way and you have your inside card completed.


The finished card.











I really like simple unfussy cardsand this isone of those, but it still look good! I'm sure you will like the charms that you can make with these small dies. Here I have used the heart dies on this Diamond Anniversary card. Simple but very effective.






If you would like to see more of my Cuttlebug work you will find me here in my Cuttlebug Cupboard. Hope you'll have time to drop by.